how to install solar flood light

Installation method

Solar flood lights are mostly installed on roofs, walls or light poles. The solar panel and the lamp body can be installed together or separately, which mainly depends on whether the sunlight in the installation location is sufficient. The solar panel is facing the sun at noon to ensure sufficient power, so that the floodlights can be brighter at night and work longer.

If it is installed on the roof or wall, usually use a percussion drill to drill holes and fix the solar panel and the lamp body with expansion bolts, link and tighten the waterproof joints to avoid loose joints or water short-circuits during use. Adjust the angle of the solar panel so that it faces the sun at noon. The longer the sun shines, the more electricity will be converted.

If it is installed on a light pole, you need to use bolts or stainless steel strips to fix the solar panel and the light body, and the other steps are the same as those installed on the wall.

Precautions for installation

The solar panel and lamp body are waterproof and moisture-proof design, and its protection level can reach IP65 and above. It can withstand the test of rain from top to bottom but cannot be submerged in water, and its protection level does not meet the requirements of underwater work.

The location where the lamp is installed needs to have a large enough bearing capacity, and its bearing capacity should be able to bear 10 times the weight of the lamp, so as to avoid loosening and falling off of the Taitai wind lamp in bad weather.

The joints between the solar panel and the lamp body must be firmly connected to avoid water short circuit. The connection line should not be too long, and it is generally recommended to be within 3 meters, otherwise the line loss is too large and the floodlight cannot be fully charged.

The lamp is a power type device, and the working environment temperature should be between -20C~+50°C. When the working environment temperature is higher than 45°C for a long time, its life will be significantly reduced, accompanied by serious light decay. Therefore, the lamps and lanterns should be placed in a ventilated and ventilated place to keep the lamps with relatively good heat dissipation environmental conditions.

Recommended style

Alibaba Platform: https://gzyaoliang.en.alibaba.com/