outdoor waterproof wall light for scenic area project

Product: outdoor waterproof wall light

About this item

Wall lamps have been used in the original interior decoration, such as rooms, living rooms and bedheads, and have gradually been extended to the outdoors. Outdoor wall lamps are favored by consumers because of their novel design, soft lighting, convenient installation, strong decorative and many other advantages. Especially in high-end residential areas and villa areas, outdoor wall lamps can not only play a good decorative effect, but also have good practicability for green lighting in the community. At the same time, outdoor wall lamps also have a very wide range of applications in scenic lighting projects. The thick die-cast aluminum housing can effectively ensure the heat dissipation of the lamp body and extend the service life. The lamp bead board is treated by filling glue, and the waterproof grade is above IP65.

Installation precautions

Outdoor wall lamps can be installed on both walls and columns. When installing on a brick wall, wooden bricks or metal components should be used during wall construction, and the lamp should be fixed to the wooden bricks or metal components when installing the lamp. When installing outdoor wall lamps on columns, metal components should be pre embedded on the columns or fixed to the columns with clamps, and then the outdoor wall lamps should be directly installed on the metal components.

The height of the lower edge of the outdoor wall lamp from the ground is 1.8-2m. The installation height of the outdoor wall lamp on all four sides can be different, but the height of the outdoor wall lamp on the same wall needs to be consistent. The structure of outdoor wall lamps should adapt to the environment of the installation site, and it is best to choose a sealed switch, as there may be frequent rain and sun exposure outdoors. If in a humid environment, porcelain waterproof switches should be used.

Outdoor wall lamps should be selected based on the wiring method and switch type. For exposed wiring, pull switches should be used, which is both economical and safe. Concealed wiring should be determined according to the wiring situation. For example, embedded concealed keyboard switches can be used for concealed wiring inside the wall. The operating mechanism of the outdoor wall lamp switch should be flexible and lightweight, and its action should be completed by the instantaneous conversion mechanism. Except for pull switch and double throw switch, the connection and disconnection of contacts should be clearly marked. If used for landscape lighting, waterproof joints can also be used to connect wall lamps in series to form a control group.