how to install solar street light
In order to facilitate transportation, solar street lights are not fully assembled at the factory, and need to install themselves, then street lights after buying back, how to install it, here share the installation steps.
1, before installing the street lamp, we must first determine the location, and determine the location according to the construction drawings and geological conditions. Usually, the street light can be installed without a sunshade object on the top of the street light, and the street light spacing should be maintained 25-30 meters, and there is no shadow in the middle. The soil at the installation of the street light should be hard, otherwise the street light is easy to collapse after installation.
2, excavating the pit, after determining the location, it is necessary to excavate the pit, if the surface is 1-3 meters of soft soil, then the excavation depth should be deepened, and it is necessary to confirm that there is no buried water pipes and cables at the excavation location. The bottom of the pit should be poured with concrete, and the shaking rod should be used to keep shaking when pouring, to ensure the compactness of the pit, and so on, after the concrete is completely solidified, the chandelier can be installed.
3, install the battery component, and then look at the positive and negative terminals of the panel, pay attention to the method before connecting the controller to prevent short circuit. Ensure that the solar cell component is securely connected to the support. Ensure that the output cable of the solar cell component is not exposed. Bind the cable with cable ties and face due south.
4, and then install the battery of the street lamp, the battery is usually in the control box, to be handled gently to avoid damage to the control box. To connect the battery, it is pressed to the terminal post with bolts and its conductivity is enhanced with copper sheets. Do not short-circuit the output cable; otherwise, the battery will be damaged.
5, finally you can begin to install the street lamp, first assemble its various parts, such as: the sun plate is fixed on the bracket, the lamp head is fixed on the pick arm, and then these components are fixed to the main rod. After the overall accessories are assembled, the street light is installed on the cement base, and the screws are fixed.
Recommended style
Alibaba Platform: https://gzyaoliang.en.alibaba.com/